ULMIA GmbH, D-88515 Langenenslingen, Altheimer Str.1

Product-overview | Company | Contact | Downloads | Imprint

 

 

ULMIA hand saws             1 | 2 | 3 | 4

Japanese saws

Dozuki
Backed saw for wood joints and tenons. The back lends the saw rigidity and facilitates guidance. The blade can therefore be designed extremely thin while permitting deep cuts. 



(back to top)

Datasheet


ULMIA hand saws Dozuki Universal
For mortising and wood joints, rip and cross cutting action.

  • Blade length 240 mm

  • Blade width 50 mm

  • Blade thickness 0.3 mm

  • Tooth pitch 1.5 mm
Application: Backed saw for tenons, joints and fitting work. The reinforced back lends rigidity to the saw and simplifies guidance.

(back to top)

Datasheet

ULMIA hand saws Dozuki Mini
Compact precision saw for small jobs and plunge cuts, primarily cross cutting action. 

  • Blade length 150 mm

  • Blade width 30 mm

  • Blade thickness 0.3 mm

  • Tooth pitch 1.4 mm
Application: Backed saw for tenons, joints and fitting work. The compact precision saw for small jobs and plunge cuts.
Ryoba
 This blade has teeth on both sides, one with trapezoidal toothing, the other with triangular toothing. Ryoba is the most commonly used and most universal of the Japanese saws.


(back to top)

Datasheet


ULMIA hand saws Ryoba Komane
Universal saw with particularly fine toothing for high surface quality

  • Blade length 240 mm

  • Blade width 84 mm

  • Blade thickness 0.4 mm

  • Tooth pitch 1.2/3 mm
Application: Saw with teeth on both sides for mortises, joints and fitting work. Trapezoidal toothing on one side and triangular toothing on the other permit widely varying application possibilities.

(back to top)

Datasheet

Kataba
ULMIA hand saws Kataba Vario  New 

  • Blade length 270 mm

  • Blade width 55 mm

  • Blade thickness 0,6 mm

  • Tooth pitch 1,7 mm
Application: Fatigue-free sawing on the reverse stroke, trapezoidal toothing for cross-grain and mitre cuts. Pistol handle.

(back to top)

Datasheet

ULMIA precision mitre cutting block
Steplessly adjustable angle and inclination. To fit Japanese Kataba hand saws from a blade thickness of 0.4-0.6 mm.

Scope of delivery:

  •  cutting block with protractor

  • setting gauge

  • longitudinal and side fence

  • Allen key and instructions for use
This new type of cutting block turns any Japanese Kataba saw with blade thickness 0.4 – 0.6 mm into a perfect mitre saw. Its steplessly adjustable inclination and angle make this the ideal device for installation work, fitting cuts in mouldings, frames, joints and for sawing in tenons. The precise blade guidance and the razor sharp toothing of the Kataba saw ensures tear-free cuts with optimum fitting accuracy.